Inline Twin Engine Ep. 4

The next part I’ll be making for the engine is what I call the cylinder block. The challenge on this part will be the O-Ring groove deep down in the bore and the space for the liquid cooling. The first picture is a sectioned rendering to illustrate how the finished part should look.

inline-twin-045-800x563

I started with squaring the block on 5 sides on the Bridgeport.

inline-twin-046-800x450

I then moved the work over to the CNC mill where the top side was faced over and two holes for the bores were pre-drilled. To rough out the two bores I used a long end mill and a helical interpolation. This is by no means the most efficient way when it comes to metal removal rate but it works very well with the long end mill. Another benefit is that it will produce the right size bore so it’s not going to take many passes with the boring head to get it to size.

inline-twin-047-800x450

And bored out to finish size using a boring head.

inline-twin-048-800x450

For the O-Ring groove I used a small slitting saw. The saw is 1 x 0.043”
The groove is quite deep down in the bore making it a bit nerve wracking as it’s impossible to see the cut. It’s one of those “let’s hope the code is right” moments…

inline-twin-049-800x450inline-twin-050-800x450

To relief the block for the coolant I used a T-slot cutter.

inline-twin-051-800x450inline-twin-052-800x450inline-twin-053-800x450

The next operation was to mill a step to seat the sleeve.

inline-twin-054-800x450

The last operation on the top of the block was to drill the holes for the cylinder head and coolant passages.

inline-twin-055-800x450

To top side finished:

inline-twin-056-800x450

The block is then turned over to drill the mounting holes on the bottom.

inline-twin-057-800x450

The bottom “flange” is milled.

inline-twin-058-800x450inline-twin-059-800x450

And the passage for the coolant inlet is drilled.

inline-twin-060-800x450inline-twin-061-800x450

Last, the step on the sides were milled. This is a cosmetic feature as I needed a bit more length on the cylinder head but didn’t want to lengthen the crankcase.

inline-twin-062-800x450

The finished cylinder block.

inline-twin-063-800x450

The engine is slowly taking shape:

inline-twin-064-800x450

 

Thank you for visiting my shop.

If you have any questions about the engine or any of the other projects, please leave a comment below, or email at yogisworkshop(at)yahoo.com

For other projects from the shop, please check out the Projects Page in the top menu.

Yogi

Advertisements

4 comments

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s